Start by determining the dimensions of the finished bracelet. Mine is 1" wide by 6 1/2" long so I doubled the width and added a 1/4" seam allowance to each side. I also added extra to each end to allow for adding the clasps. This left my final dimensions at 2 1/2" x 7"
Next, use the Stamp Factory, Ribbon Stamp Tool, and Harlequin stamp set to add an image to the center of the strip. The Ribbon Stamp Attachment includes a plate that snaps onto the bottom of the Stamp Factory. The grid on the plate helps align the Stamp Factory over the material and the grid on the stamp plate helps align the stamp inside the Stamp Factory.
When the stamped image is dry, fold the fabric in half, right-sides together. Pin the layers together and stitch a 1/4" seam along the raw edges.
Then remove the pins, press the seam open, and use the Fiskars Fingertip tweezers to turn the fabric right-side out. If the fabric is one that unravels easily, use Fray Check on the edges prior to turning.
Add a fabric flower or other embellishment to the center of the fabric tube and attach a clasp to finish the bracelet.
Supplies:
Fiskars High-Density Pigment Ink : Still of the Night # 01-003097
Fiskars push and print Stamp Factory kit # 01-003086
Fiskars Stamp Factory Ribbon Stamping Tool # 01-004765
Fiskars Harlequin – 8 inch X 8 inch # 01-004667
Fiskars Fingertip Craft Tweezers # 01-002353
Fiskars 45 mm Comfort Grip Rotary Cutter # 12-97937097
Fiskars 3" x 12" Acrylic Ruler with grid # 87608397
Fiskars 18 Inch x 24 Inch Mat # 12-83717097
other: fabric, clasp